9.2.7. SET REMINDER PERIOD
If Daily or Periodic option was selected for the calibration reminder, the reminder period must also be set.
For a daily reminder period the time of day can be set.
For a periodic reminder period the number of days, hours and minutes can be set.
• Press to move the cursor to the next field.
• Press to save the changes or to return to the previous screen.
• Press to disable the calibration reminder and return to ISE setup menu.
9.2.8. CLEAR CALIBRATION
This option clears the existing ISE calibration. If the calibration is cleared, a new calibration must be done in order to take
measurements.
• Press to clear the previous calibration or to return to the previous screen.
To Next Page
Loading...
