Sample Name: Allows the sample name to be recorded in each report. The sample name will increase by one, with each new
titration or logging report, if the last character is a number.
Company Name: Allows the company name to be recorded in each report.
Operator Name: Allows the operator name to be recorded in each report.
Electrode Name: Allows the electrode name to be recorded in each report.
Fields 1, 2, 3: Allows any additional information to be recorded in each report.
The fields must be selected from Setup Titration Report screen (see Setup Titration Report section) in order to be displayed in the
titration report.
10.3.4. METER INFORMATION
Displays titrator configuration data.
Titrator Serial Number: The serial number of the titrator base board.
Analog Board 1 Serial Number: The serial number of the analog board.
Pump 1 (and/or 2) Serial Number: The serial number of the connected pump.
Titrator Software Version: The current software version installed on the titrator.
Base Board Software Version: The current software version present on the base board of the titrator.
Pump 1 (and/or 2) Software Version: The current software version for the pump.
Analog 1 Calibration Date: Manufacturer calibration date of the analog board.
Note: If more than 1 year elapsed from the calibration date of the analog board 1, the message Analog 1 Calibration Due
Calibration Due will appear on the main screen. The analog board needs to be recalibrated.
To Next Page
Loading...
