4.4.1. TEMPERATURE SOURCE
Option: Automatic Temperature or Manual Temperature
Select the temperature source used for temperature compensation.
When Automatic Temperature Compensation is selected, “ATC” is displayed on the main screen and the temperature is read by the
temperature probe.
When Manual Temperature is selected, “Manual” is displayed on the main screen and a preset temperature value is used for
temperature compensation.
Note: The selected temperature source will be indicated in the report files: A for Automatic and M for Manual.
4.4.2. MANUAL TEMPERATURE SETTING
Option: -5.0 to 105.0 °C (23.0 to 221.0 °F, 268.2 to 378.2 K)
If the temperature probe is not connected, the user can manually set the temperature used by the titrator for compensation.
To Next Page
Loading...
