Hansa C13 - What can my Hansa chipper process?; Intended uses of the chipper; Receiving your Hansa chipper; Chipper components

Hansa C13 O&M Manual - OM-007 Revision H 21/10/19
© Hansa Chippers 2019
1
What can my Hansa chipper process?
Intended uses of the chipper
The Hansa C13 chipper is built to process organic material including wooden branches not exceeding 90 mm in diameter. It is
designed to be used on a regular basis to maintain large gardens, lifestyle blocks, acreages, along with use by semi commercial
garden maintenance contactors and hire / rental companies. Do NOT use the chipper for any other purpose.
Organic wastes include:
Prunings, stalks, roots, vegetable matter, hay, grass, bark
Dry manure
Branches
Palm fronds
Dead and hard timbers (Note: these will dull the knives faster)
Paper or cardboard
Do NOT process:
Flax, root balls
Soil, bones, sand, grit, stones, metal
If you have any questions, contact your authorised dealer.
Do NOT exceed 90 mm branch diameter
Receiving your Hansa chipper
You may receive your chipper assembled from your dealer or it may be packaged in two boxes. Assembly takes approximately 30
minutes, two people working together will make the assembly easier.
Chipper components