Hansa C65 - What Can My Hansa Chipper Process; Intended Uses of the Chipper

Hansa C65 O&M Manual – OM-028 First Release 4/05/2021
© Hansa Chippers 2021
1
What can my Hansa chipper process?
Intended uses of the chipper
The Hansa C65 chipper is built to process organic material including wooden branches not exceeding 254 mm in diameter. It is
designed to be used on by commercial arborists, tree contractors and hire / rental companies. Do NOT use the chipper for any
other purpose.
Organic wastes include:
Prunings, stalks, roots, vegetable matter, hay, grass, bark
Branches
Palm fronds
Dead and hard timbers (Note: these will dull the knives faster)
Paper or cardboard
Do NOT process:
Flax, root balls
Soil, bones, sand, grit, stones, metal
If you have any questions, contact your authorised dealer.
Do NOT exceed 254 mm branch diameter