MA310 | MA510 | MA710 Owner's Manual | rev1.3 20240612
Pg 12 of 42
©2024 Harman International | Features, Specifications, and Appearance subject to change without notice.
BLUETOOTH OPERATION
Connecting your phone or tablet:
• Select the Bluetooth input on the AVR for Bluetooth pairing of a source device. Push and Hold the Input knob to
initiate Pairing Mode.
• To pair your Bluetooth source device, open the Bluetooth settings on your source device and scan for
MA310/MA510/MA710 ###### from the list. Each product has a unique ID.
2. Push to Select “Bluetooth”
3. Push and Hold to activate Pairing Mode
4. Open the Bluetooth settings on your phone/tablet.
Scan for MA310/MA510/MA710 ###### and select
from the list. Each product has a unique ID.
Push to Mute/Unmute
• The AVR can recall 7 device pairings. If 7 are in memory already, the oldest will be replaced.
• Because portable devices often have a volume slider. Upon pairing, there is a default volume setting in the amplifier to
prevent excessive volume output being selected accidentally. The default is 20.
To Next Page
Loading...