MA310 | MA510 | MA710 Owner's Manual | rev1.3 20240612
Pg 30 of 42
©2024 Harman International | Features, Specifications, and Appearance subject to change without notice.
CALIBRATING THE SYSTEM WITH EZ SET EQ
The EZ Set EQ app will automatically try to establish a connection with the AVR.
Connectivity between the mobile device and the JBL MA Series AV Receiver models are as follows:
If the auto-connect fails:
MA310
Confirm the mobile device has successfully paired via Bluetooth to the AVR via and that Bluetooth is selected as the input
source.
MA510, MA710
Confirm that the mobile device and the AVR are connected to the same network. Check that the IP address of the AVR is on
the same subnet in network settings. You can confirm this by navigating to Menu > Setup > Network Status > Status. Network
should be selected as the input source.
To Next Page
Loading...