Harman JBL MA310 - Page 5

©2024 Harman International | Features, Specications, and Appearance subject to change without notice.
Pg 5 of 9
EN
Bluetooth Operation
Connecting your phone or tablet:
• Select the Bluetooth input on the AVR for Bluetooth pairing of a source device. Push and Hold the Input knob to initiate Pairing Mode.
• To pair your Bluetooth source device, open the Bluetooth settings on your source device and scan for
MA310/MA510/MA710 ######
from the list. Each
product has a unique ID.
Bluetooth
Stereo
Vol.31
1. Rotate Input Carousel
2. Push to Select "Bluetooth"
3. Push and Hold to activate Pairing Mode
4. Open the Bluetooth settings on your phone/tablet. Scan
for
MA310/MA510/MA710 ######
and select from the
list. Each product has a unique ID.
Rotate to Control Volume
Push to Mute/Unmute
• The AVR can recall 7 device pairings. If 7 are in memory already, the oldest will be replaced.
• Because portable devices often have a volume slider. Upon pairing, there is a default volume setting in the amplier to prevent excessive volume output
being selected accidentally. The default is 20.