Harman International Industries,
Incorporated.
8500 Balboa Blvd, Northridge CA 91329
United States.
European Representative: Harman International Industries, Incorporated.
EMEA Liaison Office, Danzigerkade 16
G, 1013 AP Amsterdam, The Netherlands.
Business Address: Ground Floor, Westside 2, London Road, Apsley, Hemel Hempstead,
HP3 9TD, United Kingdom.
© 2022 Harman International Industries, Incorporated. All Rights Reserved
.
JBL is a trademark of Harman International Industries, Incorporated
registered in the United
States and other countries.
Features, Specifications, and Appearance subject to change without notice.
MA310 | MA510 | MA710 Quick Start Guide | Rev 1.3 20240612 | Features, Specifications, and Appearance subject to change without notice.
This equipment complies with European COMMISSION REGULATION (EU) 2023/826
Model: MA310
Power supply: 110-240 V, 50-60Hz
Standby consumption:<0.5W
Max. operating temperature: 35C
Model: MA510
Power supply: 110-240 V, 50-60Hz
Standby consumption (NET Off/NET On) :<0.5W / <2W
Max. operating temperature: 35C
Model: MA710
Power supply: 110-240 V, 50-60Hz
Standby consumption (NET Off/NET On) :<0.5W / <2W
Max. operating temperature: 35C
Standby time
When there is no audio input and no user operation, after 20 minutes, unit will enter standby mode.
User can change the standby mode through the menu, "Setup" ->"System Setup" ->"General Setup" ->"Standby Mode"
User also can change the auto standby time through the menu, "Setup" ->"System Setup" ->"General Setup" ->"Auto Standby".
How to turn off the wireless network
The default network mode is set as 'Auto' mode, in this mode, wired connection will be used if network cable is plugged in, otherwise Wi-Fi will be
used. User can change the network mode from the product web interface.
To Next Page
Loading...