Pg 3 of 14
©2024 Harman International | Features, Specifications, and Appearance subject to change without notice.
NETWORK CONNECTION (Does not apply to MA310)
For a Wired Connection
Connect the Ethernet port on the back of the AVR to any of the open ports on your network router using a CAT-5e or higher
cable.
Ethernet Socket
Connect this to your home
network using a Cat 5e or
Cat 6 cable
For a Wi-Fi Connection:
To make a Wi-Fi connection, download the JBL PREMIUM AUDIO app to your smartphone or tablet. Links are on the front
page of this manual.
Connect the supplied external antennas for Bluetooth/Wireless connectivity to connectors on the rear panel.
1. Place the external antennas for
Bluetooth/wireless connectivity
evenly over the screw terminal of
rear.
2. Turn clockwise until the antenna
is fully connected.
3. Rotate the antenna upwards for
best reception.
Power on the AVR and open the app to discover it after the AVR is Ready. Select it and
follow the prompts to connect it to your Wi-Fi network.
Alternatively, you can connect the JBL AVR to your Wi-Fi network using Apple AirPlay
speaker setup in the Wi-Fi settings of your Apple device.
To Next Page
Loading...