Harris Platinum Z2 CD - 1 Introduction;Specifications; Introduction

888-2406-002 1-1
WARNING: Disconnect primary power prior to servicing.
Introduction/
Specifications
1.1 Introduction
This technical manual describes the Harris Platinum Z2 solid-state FM radio
transmitter. This manual contains all the information needed to install, operate and
service these transmitters.
This manual contains the following sections:
• Section 1: Introduction/Specifications, identifies the versions of the product
available and the possible options, and provides specifications.
• Section 2: Installation/Initial Turn-on, details the procedures to receive, install
and prepare the transmitter for use, up through the initial turn-on of the equip-
ment.
• Section 3: Operators Guide, describes operation of the equipment and is intended
to be the primary section referenced by operating personnel.
• Section 4: Overall System Theory, is included to help service personnel to under-
stand the inner workings of the transmitter.
• Section 5: Maintenance/Alignments-Adjustments, lists and explains alignments
and adjustments which might be required once the transmitter leaves the Harris
Broadcast factory.
• Section 6: Troubleshooting, is included as a servicing aid, to be used along with
Sections 4 and 5 by qualified service personnel to identify and correct any equip-
ment problem which might develop.
• Section 7: Parts List, a comprehensive listing any of the equipment’s components
which might ever be needed.