888-2406-002 3-7
WARNING: Disconnect primary power prior to servicing.
Operator Guide
3.4.4 Diagnostic Codes
For ease of discussion a simple code will be used to guide you to the area or screen
being discussed. The code will have the name of one of the HOME menu items
listed above, followed by the appropriate A, B, C or D function key presses required
to get to the screen being discussed. The code will always be enclosed in brackets
[x,x,x].
NOTE:
It will be assumed that you always press the HOME key first before entering
the key sequences in the brackets.
Example 1
If you wanted to check the temperature of the individual Power Amplifiers, you
would press the following keys;
[HOME, METERING C,A,C]
After entering this key sequence the screen should look like Figure 3-6. This is
equivalent to pressing the following menu items as they appear on each successive
screen:
METERING, TEMPERATURE, PA
Figure 3-6 PA Temperature Metering
[HOME, METERING C,A,C]
To Next Page
Loading...
