Harris VCA6800+ - Unpacking the Module; Preparing the Product for Installation; Checking the Packing List

VCA/VDA/VEA6800+ Installation and Operation Manual 15
Chapter 2: Installation and Configuration
Preliminary—Contents are proprietary and confidential. Do not photocopy or distribute.
Unpacking the Module
Preparing the Product for Installation
Before you install the VCA/VDA/VEA6800+, perform the following:
• Check the equipment for any visible damage that may have
occurred during transit.
• Confirm receipt of all items on the packing list. See “Checking the
Packing List” for more information.
• Remove the anti-static shipping pouch, if present, and all other
packaging material.
• Retain the original packaging materials for possible re-use.
See “Unpacking / Shipping Information” on page ix for information
about returning a product for servicing.
Checking the Packing List
Note
Contact your customer service
representative if parts are
missing or damaged.
Table 2-2. VCA/VDA/VEA6800+ Packing List
Ordered Product Content Description
VCA6800+
VCA6800+
• One VCA6800+ front module
•One VCA / VDA / VEA6800+ Installation and
Operation Manual
VCA6800+S
• One VCA6800+ front module
• One standard single-slot back connector
•One VCA / VDA / VEA6800+ Installation and
Operation Manual
VCA6800+D
• One VCA6800+ front module
• One standard double-slot back connector
•One VCA / VDA / VEA6800+ Installation and
Operation Manual
VCA6800+SR
• One standard single-slot back connector
VCA6800+DR
• One standard double-slot back connector
VDA6800+
VDA6800+
• One VDA6800+ front module
•One VCA / VDA / VEA6800+ Installation and
Operation Manual