VCA/VDA/VEA6800+ Installation and Operation Manual 17
Chapter 2: Installation and Configuration
Preliminary—Contents are proprietary and confidential. Do not photocopy or distribute.
Setting Jumpers and Adjustable Components
VCA6800+
The VCA6800+ module has four jumpers, which are used to select the
following modes:
• One jumper for looping or internal input termination
• Two jumpers for AC or DC coupling mode
• One jumper for soft-, hard-, or no-clamping mode
The VCA6800+ module also has adjustable potentiometers (“pots”) for
Gain and EQ modes.
Figure 2-1. Location of the VCA6800+ Jumper Blocks and Adjustable Pots
To Next Page
Loading...
