HATO 400Y User Manual

HATO 400Y
AUTOMATION MANUAL
FOR SLIDING GATES
WITH SLOW DOWN

HATO 400Y Specifications

General

Opening Speed	12 seconds
Closing Speed	12 seconds
Type	Gate Opener
Max Gate Weight	400 kg
Motor Voltage	24V DC
Remote Control Distance	30 m
Model	HATO 400Y
Operating Temperature	-20°C to +60°C

Summary

Recommendations and Precautions

Description and Principle of Operation of the Drive

Important Safety Instructions

Description and Principle of Operation of the Controller

Driver Installation

Connecting the Limit Switch for Opening and Closing

Details how to connect limit switches for precise gate positioning.

Connecting Photocell

Instructions for connecting photocells for safety and obstacle detection.

Connection of the Manual Control

Guide for wiring the manual control button or switch.

Pulse Generator Connection - OPTIONAL

Optional connection for the pulse generator (encoder).

Capacitor Connection

Instructions for connecting the capacitor.

Motor Connection

Wiring details for connecting the motor to the controller.

Connection of Signal Lighting

How to connect signal or warning lights.

Power Connection

Connecting the main power supply to the controller.

Connection Diagram

Setting Programming

Autoclose Function

Engine Operation Programming

Restoring Default Settings

Wicket Function

Adjusting the Width of the Gate Opening

Switching Off the Wicket Function

Run Time

Open Only Function

Photo Close Function

Limit Switch Type

Deleting All Transmitters

Deleting Transmitters from a Particular Function

Programming of Transmitters

Programming the Transmitter for the SBS Sequence Control Function

Guide to programming transmitters for sequential control commands.

Programming the Transmitter for the Wicket Function

Steps for assigning transmitters to control the partial opening function.

Technical Specification

Declaration of Conformity

Warranty Conditions