Hatz 1B30 - 8.2.10 Clean the exhaust screen; Cleaning the exhaust screen in standard models

To Next Page

To Previous Page

1B20, 1B27, 1B30, 1B40, 1B50 Maintenance

HATZ

75Operator's Manual

Step Activity Figure

3 Remove the deposits in the

screen insert with a suitable

wire brush.

4 Check the screen insert for

cracks or breakage, and re-

place if necessary.

5 Mount the screen insert and

bracket again.

6 Tighten the hex nut (1) by ap-

prox. one turn.

7 Insert the exhaust manifold

with the bracket (2) into the

hole and pull it back to the out-

side so that the bracket can no

longer become unhooked.

8 Tighten the hex nut.

Other manuals for Hatz 1B30