Hatz 1B30 - Page 76

Maintenance 1B20, 1B27, 1B30, 1B40, 1B50
76
HATZ
Operator's Manual
Clean the exhaust screen in models for rammer operation (1B20 R)
Step Activity Figure
1 Release the hex nut and take
off the exhaust manifold (1).
2 Remove the hex nut from the
bracket (2) and pull out the
screen insert (3).
3 Remove the deposits in the
screen insert with a suitable
wire brush.
4 Check the screen insert for
cracks or breakage, and re-
place if necessary.