3-4L43C, 3-4M43, 3-4M43Z Operation and use
HATZ
47Manual
Step Activity
Regeneration of the diesel particulate filter is activated
1 The regeneration process starts automatically and continues un-
noticed while the engine is running. The indicator (4) lights up.
Regeneration of the diesel particulate filter not possible
1 When the indicator (3) lights up the exhaust gas temperature is
too low. The regeneration process can not be started.
Remedy: Increase the engine load.
NOTE: The way the engine load is increased depends on the re-
spective use of the engine.
If possible, do not reduce the engine load during the regenera-
tion process.
Suppressing regeneration of the diesel particulate filter
1 If the regeneration process is to be suppressed for a the short
time, press the pushbutton (1) (maximum 2 seconds). The indi-
cator (5) lights up. Pressing the button again reactivates the re-
generation.
NOTE:
Switch back to the regular regeneration process as soon as pos-
sible.
To Next Page
Loading...
Need help?
General
