Maintenance 3-4L43C, 3-4M43, 3-4M43Z
72
HATZ
Manual
Step Activity
6 After a brief trial run, check the cylinder head cover for tight-
ness.
8.2.13 Changing the oil filter
Safety note
CAUTION
Danger of burns.
When working on the engine there is a danger of burns from hot
oil.
▪ Wear personal protective equipment (gloves).
▪ Collect the used oil and dispose of it according to local envi-
ronmental regulations.
Overview
1 Oil filter
2 Strap wrench
3 Gasket
Procedure
Step Activity
1 Release the oil filter (1) with a strap wrench (2) and quickly un-
screw it or pull it out.
▪ HATZ order no. for strap wrench: 620 307 01.
2 Dispose of the old filter in accordance with local environmental
regulations.
To Next Page
Loading...
