Maintenance 3-4L43C, 3-4M43, 3-4M43Z
48
HATZ
Manual
8 Maintenance
8.1 General maintenance instructions
Safety notes
WARNING
Danger of injury from failure to follow the operating instruc-
tions and from performing unauthorized tasks on the ma-
chine.
▪ Follow all instructions.
▪ Do not perform activities for which no qualification is avail-
able. Contact properly trained personnel if necessary.
NOTICE
Comply with the safety chapter!
Follow the basic safety instructions in chapter 3 Safety, page 7.
▪ Maintenance tasks may only be performed by trained personnel.
▪ Accident prevention measures must be in accordance with the local acci-
dent prevention regulations.
▪ Perform setting and maintenance work at the specified intervals.
▪ Replace faulty machine parts as soon as possible.
▪ Always wear personal protection equipment.
▪ Only use fully functional tools.
▪ Installation of unsuitable spare parts can lead to problems. We cannot ac-
cept responsibility for direct damage or secondary damage that results
from this. We therefore recommend the use of Hatz original spare parts.
▪ Closely adhere to the maintenance conditions prescribed in this manual.
▪ Only make changes on the machine in agreement with the manufacturer.
▪ Only perform maintenance when the engine is switched off.
▪ Protect start-up devices (crank handle, recoil start or starting key) from
unauthorized access.
▪ After completing maintenance work, check that all tools, bolts, aids, and
other objects are removed from the machine, and that all safety equipment
has been replaced.
▪ Before starting, ensure that no persons are located in the danger zone of
the engine or machine.
▪ Adhere to legal regulations when handling and disposing of used oil, fil-
ters, and cleaning agents.
To Next Page
Loading...
