Hatz M Series User Manual

3-4L43C, 3-4M43, 3-4M43Z Faults
HATZ
93Manual
Flashing signal
Flashing – Pause
Possible causes Remedy Chapter
1 – 1
Area affected:
Engine oil pres-
sure
Engine oil level too
low.
Check the oil level. 7.8 Check-
ing the oil
level and
adding oil if
necessary,
page 43
2 – 1
Area affected:
Engine tempera-
ture
Too much engine
oil in the engine.
Drain the engine oil
to the max mark on
the dipstick.
Inadequate cooling:
Contamination of
the cooling air
guides or another
impairment of the
cooling system.
Clean the cooling
air area.
8.2.7 Clean-
ing the cool-
ing fan,
cooling fins
and oil
cooler, page
58
Incompletely
closed air guide
parts or capsule
parts.
Check the air guide
parts and shafts for
completeness and
good sealing prop-
erties.
3 – 1
Area affected:
Charge control
Faulty charging cir-
cuit cabling.
Check the cabling.
Loose contacts on
cable connections.
Check the cabling.
Faulty three phase
alternator.
Contact Hatz ser-
vice.
4 – 1 or
6 – 1
Area affected:
Powered machine
Fault signal from
the powered ma-
chine.
See the documen-
tation for the com-
plete machine.
8 – 1
Area affected:
Engine speed
Engine speed too
high:
▪ Faulty electronic
speed governor.
Contact Hatz ser-
vice.

Hatz M Series Specifications

General

Brand	Hatz
Model	M Series
Category	Engine
Language	English