27
INSTALLING OPTIONAL RF PANELS (continued)
Installing RF Panels to Optimize Range:
1. Position both receivers away from any cables (such as power lines, extension cords, cable lines, and
phone lines).
2. Mount far away from large metallic objects (such as fences, aluminum siding, metal piping, and rain gutters).
3. Be sure there are no metal objects between the spa receiver and the spa.
4. Position the receiver so that the antenna is pointing upwards, perpendicular to the ground.
5. Position as high off the ground as possible:
When using both receivers, place the spa unit as high off the ground as possible while placing the master panel
unit lower and at least 5-6 feet to one side.
When only using one receiver, place it as high as possible.
Make sure the master panel system gives you the proper range before mounting it permanently.
The closer it is mounted to the ground, the less range it will have.
While the master panel tends to be stationary and more predictable, the spa transmitter moves around and
should receive the highest mounting position possible.
6. IMPORTANT: Line of sight between the receiver and the spa provides the best range.
CAUTION: PLEASE READ THE FOLLOWING INSTRUCTIONS BEFORE INSTALLATION.
7. CAUTION: With all above noted tips in mind, experiment by placing receiver(s) in different places to find the best
range before permanently mounting the receiver(s) to the wall.
To Next Page
Loading...