Modules and transducers
Quantum
X
I3031-14.0 HBM: public 103
8.4 MX410B highly dynamic universal
amplifier
You can connect up to four transducers to the highly dy
namic universal amplifier MX410B. The transducers are
connected via 15-pin D-SUB-15HD device connectors.
You will need BNC adapters (accessory 1-IEPEMX410)
to connect the IEPE transducers.
All measuring channels are electrically isolated from one
another and from the power supply. When using the ad
justable transducer excitation, electrical isolation from the
supply voltage of the amplifier is not required.
MX410B connectable transducers
Transducer type Connection sockets See page
SG full bridge 1 ... 4 138
SG half bridge 1 ... 4 141
SG quarter bridge via adapter 1 ... 4 143
Inductive full bridge 1 ... 4 139
Inductive half bridge 1 ... 4 142
Electrical voltage 1 ... 4 150, 151
To Next Page
Loading...
