HBM MX840B - Page 4

4 I3031-14.0 HBM: public Quantum
X
6.4.6 Backplane with IEEE1394b FireWire connection 57...............
6.4.7 System layout with several backplanes 58........................
7 Connecting individual QuantumX modules 59.................
7.1 Connecting the supply voltage 59...............................
7.2 Connection to host PC or data recorder 62.......................
7.2.1 Single Ethernet connection 62..................................
7.2.2 Multiple Ethernet connection with PTP synchronization 63..........
7.2.3 Multiple Ethernet connection and FireWire synchronization 64......
7.2.4 Connecting one or more QuantumX modules to the PC 65.........
7.2.5 Firmware update via Ethernet 73................................
7.2.6 Connection via FireWire (IEEE 1394b) 74........................
7.2.7 Setting up FireWire 1394b on the PC 75.........................
7.2.8 Multiple FireWire connection 77.................................
7.2.9 Layout with data recorder CX22B‐W 78..........................
7.2.10 Output measurement signals to CAN bus (MX840B) 79............
7.2.11 Output measurement signals to CAN bus (MX471B) 79............
7.2.12 Output of signals with standardized voltage in real time (MX878B
or MX879B) 80...............................................
7.2.13 Output signals in real time via EtherCAT® and in parallel
via Ethernet 81...............................................
7.2.14 QuantumX in the FireWire group 82.............................
7.2.15 Optical FireWire connection 85.................................
8 Modules and transducers 87.................................
8.1 General information 87........................................
8.1.1 Shielding design 87...........................................
8.1.2 Active transducer connection 89................................
8.1.3 TEDS 91....................................................
8.1.4 Background calibration / autoadjustment 94......................
8.2 MX840/A/B universal amplifier 96...............................
8.2.1 MX840B pin assignment 98....................................