QuantumX
A2361-3.3_en/de 27
Note
Please check in advance whether a firmware or software
update is required. Software/firmware downloads can be
found on the HBM website: www.hbm.comdownloads
Setting up FireWire
S Integrate the FireWire PC adapter into your computer.
S Install the FireWire driver provided by HBM.
Note
For trouble shooting purposes you can switch to the
original FireWire driver with the tool
“t1394bus_installwizard.exe”. You can find the tool after
having installed the driver on your hard disc.
S After installation and configuration, connect the
FireWire cable first to the PC adapter and then to the
first module. Activation is confirmed acoustically by
Windows.
Whenever you connect a new module via FireWire to
your computer, the operating system will prompt you to
register the module. Always refer here to the driver
“hbm1394.sys”.
S Install and then start the latest QuantumX Assistant
on your PC.
S Click on the icon (Find modules) or press the function
key F4.
To Next Page
Loading...
