Safety instructions
VK20A A2335-2.0 HBM: public 5
It is strictly forbidden to carry out any repairs and solder
ing work on the motherboards or to replace any compo
nents. Repairs may only be carried out by persons autho
rized by HBM.
S During installation and when connecting the cables,
take action to prevent electrostatic discharge as this
may damage the connected electronics.
S When connecting additional devices, comply with the
safety requirements for electrical measurement, con
trol, regulatory and laboratory equipment (EN 61010).
S All the interconnecting cables must be shielded
cables. The shield must be connected extensively to
ground on both sides.
To Next Page
Loading...