24 C 08 Order No. BA 92-20-262 Issue 01.03.08
THREAT TO LIFE to persons fitted with a pace maker
Strong electro-magnetic fields occur in the vicinity of the stud
welding unit during welding. Such fields may affect the proper
function of a pace maker. Thus persons equipped with a pace
maker must not operate the stud welding unit and must not stay in
its vicinity during welding.
During the actual welding process, you must expect red-hot
welding spatters, possibly liquid spatters, a flash, and a loud bang
> 90 dB (A). Alert any colleagues who are occupied in the vicinity of
the welder.
Wear your personal protective equipment according to actual
standards (see appendix).
MAGNETIC FIELDS!
During stud welding, strong magnetic fields are present. Do
not weld in the vicinity of electrical systems and machines
which could be affected.
Warning: Unauthorized interference with the stud welding
unit as well as unauthorized alteration of the stud welding
unit are prohibited and result in complete cancellation of any
guarantee and liability claims against HBS.
In case of any accidents whatsoever, advise a physician, your supervisor, and
the official bodies immediately.
5 Stud Welding Procedure
5.1 Safety Instructions
To Next Page
Loading...
