HBS C 08 - Page 51

C 08 Order No. BA 92-20-262 Issue 01.03.08 51
Machine safety
2006/95/EC Electrical equipment designed for use within
certain voltage limits
2004/108/EC EMC-Guidelines
98/37/EC Machine guideline (valid until 28.12.2009)
2006/42/EC Machine guideline (valid from 29.12.2009)
DIN EN 60204-1 Safety of machinery - Electrical equipment of
machines - Part 1: General requirements
DIN EN 60529 Degrees of protection provided by enclosures
(IP code)
DIN EN 60974-1 Arc welding equipment - Part 1: Welding power
sources
DIN EN 60974-10 Arc welding equipment - Part 10:
Electromagnetic compatiblity (EMC)
requirements
Personal safety and accident prevention
DIN EN ISO 20345 Personal protective equipment -
Safety footwear
DIN EN 12477 Protective gloves for welders
DIN EN 166 Personal eye-protection - Specifications
DIN EN 352-1 Hearing protectors - General requirements -
Part 1: Ear-Muffs
BGV A1 Accident-prevention regulation „Principles of
prevention“
BGV A3 Accident-prevention regulation „Electrical
equipment and operating material“
BGV A8 Accident-prevention regulation „Health and
safety signs at work“
BGV B11 Safety rules “EMC”
BGV D1 Safety rules - welding, cutting and similar
processes
Please note that in your country additional standards and
safety conditions (especially rules for accident prevention)
may differ from the standards mentioned in this operating
manual.
Regulations and Standards