29©HBS Bolzenschweiss-Systeme GmbH & Co. KG
All rights reserved – Reprinting, in whole or in part, only with the approval of the manufacturer
11 Welding
11 Welding
Work according to the original operating manual of the HBS power
unit.
Danger if used other than for the intended purpose
Use the welding gun only for CD stud welding or short cycle drawn arc
welding and only in combination with power units from manufacturer:
HBS Bolzenschweiss-Systeme GmbH & Co. KG
Felix-Wankel-Strasse 18
85221 Dachau
GERMANY
Always check with the operating manual of your power unit whether this
welding gun may be used.
To Next Page
Loading...
