HBS CA 08 - Maintenance and Care; Cleaning

©HBS Bolzenschweiss-Systeme GmbH & Co. KG
All rights reserved – Reprinting, in whole or in part, only with the approval of the manufacturer
32
13 Maintenance and Care
13 Maintenance and Care
Electric shock hazard
 Never perform maintenance and service work on your stud welding gun
while it is connected to the stud welding unit
 Prior to this disconnect the stud welding gun from the stud welding unit.
Danger from insufciently qualied operating personnel
 Carry out only the work described here on your stud welding gun.
 Repairs may only be carried out by appropriately qualied personnel.
 Inform your dealer or your maintenance department.
13.1 Cleaning
 Clean the casing of your stud welding gun with a slightly damp washcloth, when
necessary.
 Do not use solvents for cleaning.
These may damage plastic components.