HBS Visar 650 - Setting the Welding Parameters; Adjusting the Welding Time; Adjusting the Welding Current

©HBS Bolzenschweiss-Systeme GmbH & Co. KG
All rights reserved – Reprinting, in whole or in part, only with the approval of the manufacturer
38
12 Welding
12.3 Setting the Welding Parameters
Adjusting the Welding Time
 First determine the necessary welding time.
 Read and observe here Point 12.2 „Determining the Welding Time and
Welding Current“.
 Only now set the welding time ( ) with the knob.
Adjusting the Welding Current
 First determine the necessary welding current.
 Read and observe here Point 12.2 „Determining the Welding Time and
Welding Current“.
 Only now set the welding current ( ) with the knob.