15©HBS Bolzenschweiss-Systeme GmbH & Co. KG
All rights reserved – Reprinting, in whole or in part, only with the approval of the manufacturer
5 Technical Data
5 Technical Data
Stud welding unit Visar 650 for ARC stud welding
according to current standards
Welding range ARC:
SC:
dia. 2 to 8 mm, M3 to M10 (type RD)
dia. 2 to 6 mm, M3 to M6
Welding material Mild steel, stainless steel
Welding rate M3 = 40 studs/min
M8 = 12 studs/min
Welding current 650 A (max.)
Current adjustment range 100 to 650 A
Welding time 5 to 200 ms (stepless)
Primary power 100 to 240 V, 1 phase, 50/60 Hz, 16 AT
Primary plug 16 A 2-pin grounded safety plug (plug type
F CEE 7/4)
Connected load 3 kVA
Cooling type F (temperature controlled cooling fan)
IP Code IP 44 (also permits operation outdoors)
Ambient temperature limits 0 °C to 40 °C
Dimension L x B x H 474 x 337 x 351 mm (with handle)
Weight 18 kg
To Next Page
