Need help?Do you have a question about the HDPlex H5 and is the answer not in the manual?
Lists the main chassis parts like top, base, side, and back plates.
Details the faceplate, lock system, and power button assembly.
Lists aluminum plates, copper baseplate, heat pipes, and thermal paste.
Includes racks, cables, drivers, and adapter plates for peripherals.
Identifies and illustrates M3*5, M5*8, and M4*8 black screws.
Details nylon screws, HDD mounting screws, and copper posts for various mounts.
Lists screws for slim optical drives and silver flat head screws.
Covers self-tightening nuts and 7mm copper posts for motherboard installation.
Attaches rubber feet to the bottom of the base plate using specific screws.
Installs 7mm copper posts onto the base plate for motherboard placement.
Secures the copper posts with self-tightening nuts on the base plate's underside.
Secures the left side panel to the H5 base plate using screws.
Attaches the faceplate's hinge mechanism to the left side panel.
Lists all components included in the CPU heat sink installation kit.
Installs CPU bottom racks and plastic screw holders onto the heatsink base.
Attaches the assembled CPU cooler base to the motherboard using screws.
Guides the installation of eight copper heat pipes into their designated slots.
Attaches aluminum plates to secure the heat pipes to the side panel.
Installs the aluminum top plate onto the heat pipes using screws.
Installs 160W AC-DC and 250W DC-ATX units into the chassis.
Attaches the PSU to its rack and then to the chassis base plate.
Secures 3.5" and 2.5" HDDs to the drive racks using specified screws.
Uses copper posts (50mm, 40mm) to mount HDD racks and optical drive racks.
Secures the slim optical drive to its rack and then to the chassis.
Installs half-height PCIe cards and power adapter plates before the main back plate.
Installs DC adapter plates and the ATX modular bridge input board.
Attaches the motherboard I/O shield and locks half-height cards.
Lists GPU heat sink parts and advises on initial testing and preparation.
Attaches the copper plate to the GPU and installs the PCIEx16 riser card.
Installs the video card to the H5 back plate using the bracket.
Attaches heat pipes and aluminum plates to the GPU heat sink assembly.
Applies thermal pads to MOSFETs and inductors, then installs heat sink blocks.
Installs copper posts and the PCB onto the backside of the H5 faceplate.
Connects PWR and USB pins to the motherboard and installs the power button assembly.
Installs the copper lock system receiver, hinge pieces, and tests the mechanism.
Tests the PC's connectivity and function, then installs the top plate.
General| Brand | HDPlex |
|---|---|
| Model | H5 |
| Category | Computer Accessories |
| Language | English |
To Next Page