Hear Back PRO User Guide
16
SYSTEM ACCESSORIES
supercardioid pattern
CAT5 & CAT6 OPTICAL INSERT ANALOG
AM12 AMBIENT MICROPHONE
12 inch condenser gooseneck mic with super
cardioid pattern for use with Hear Back PRO
Mixer as an ambient or intercom microphone.
The AM12 features 15 volt phantom power,
30Hz – 16kHz frequency response, and
-40dB sensitivity.
CABLES
Hear Technologies offers a variety of quality cables that work with
your system including CAT5e, CAT6, Optical, Insert and Analog
DA-88 style cables.
MIXER TILT ADAPTER
The Mixer Tilt Adapter is for all Hear Back
Mixers adding a ball joint with 5/8” 27 male
threading to any standard mic stand to get the
perfect angle with 360° rotation and 180° tilt.
MICROPHONE STAND ADAPTER
Mount the Hear Back Mixer to the side of any mic stand or
standard music stand using the MSA Mic Stand Adapter.
This clamp-on adjustable width bracket attaches to the built-in
5/8” threaded socket located on the back of the Mixer.
TOTE BACK
This soft-side nylon carrying case is perfect for carrying
(8) Hear Back Mixers or (4) Mixers and (1) Hub. Adjustable
dividers allow you the freedom to customize the compartments.
PRO MIXER DISTRO
• Allows a single CAT6 cable to be run from a Hear Back PRO
Hub to the stage/studio where the PRO Mixers are located.
• Provides (8) RJ45 gigabit Ethernet ports with power for
connecting Hear Back PRO Mixers, Hubs, or Distros. A ninth
input port is included for connecting to the HBUS out of Hubs
or other Distros (unlimited daisy-chaining possible).
• Pre-loaded with a network card already (PRONET) so you can
use your existing network card from your
Hear Back PRO Hub.
• Durable anodized housing
available in black or
silver finish.
PRO INTERCOM FOOTSWITCH
• Allows one microphone to double as both a vocal mic for the
sound system and an intercom mic for the Hear Back PRO
Mixer or Virtual Mixer using your mixing console’s mic preamp.
• Pressing the Footswitch silently interrupts audio passed from
the microphone to the PA output; audio is then fed to the Hear
Back PRO Mixer and the intercom is automatically engaged.
• Can also be used in any application where a momentary A/B
XLR switch is needed.
• Does not require any external power or battery.
To Next Page
Loading...
