EasyManua.ls Logo

Hear Technologies Hear back pro - Other Hear Technologies Products; Limited Warranty

Hear Technologies Hear back pro
24 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Hear Back PRO User Guide
HEAR BACK OCTO
17
4x4 Dante (4 Dante Inputs and 4 Dante Outputs)
Master volume control for headphones
Easy access to all volume controls on face of unit
Dual-color signal and peak indicators on each input channel
Concentric volume control on each channel reduces space and simplifies user interface by
placing local inputs on the tips and Dante inputs on the rings of each knob
True 48-volt phantom power remotely/locally selectable on each microphone input
Local control of up to 10 channels of audio
(eight inputs plus a stereo AUX input)
Master Volume controls the level of headphones,
line outs, and AUX input
Audio inputs ADAT, analog, and HearBus are
switch-selectable from the front panel
Capacitive touch link buttons
Standard CAT5e power and signal connection
100% backwards compatible with the original
Hear Back system
Compatible with the Hear Back PRO system via
optional PRO Hub ADAT Card
Includes 1/8” and 1/4” headphone jacks
LIMITED WARRANTY
Hear Technologies warrants the equipment against defects in materials
and labor for a period of one year from the original date of purchase. The
duration of this warranty is limited to claims made to Hear Technologies
within the periods stated with respect to parts and labor from the date
of purchase. During the warranty period, defective equipment will
be replaced or repaired to the general condition as received, at the
discretion of Hear Technologies.
All transportation is the responsibility of the purchaser or owner.
Equipment should be shipped in the original shipping box.
This warranty applies only to defects in materials and workmanship and
does not cover failure or damage due to shipping loss or damage, abuse,
misuse, misapplication, incorrect or varying power line voltages, lack
of proper maintenance, natural disasters, acts of God, or unauthorized
modifications, repairs, or any alterations done without the expressed
written consent by Hear Technologies. Hear Technologies shall not be
liable for any loss of use of the equipment, or consequential damages,
including damages to other parts of the installation in which the
equipment is a part.
Hear Technologies does not make any warranty, express or implied,
other than the warranty contained herein. No agent, representative, or
employee has the authority to increase or alter the liability, obligations,
and terms of this warranty or sale of the equipment. NOTE: It is strongly
recommended that any equipment returned to Hear Technologies be
properly packaged and insured for its full value in case of loss, handling
or shipping damage.
Hear Technologies shall not be responsible for damage or loss of
equipment during shipment.
The following are registered trademarks of Hear Technologies:
Hear Technologies, Hear Back, Control Your Mix, Talk Back, Extreme Extender, Hearbuds, HearBus, and the “Jack” logo.
All names and marks of other companies belong to those respective companies.
OTHER HEAR TECHNOLOGIES PRODUCTS
SWITCH BACK M8RX
WSG BRIDGE
Up to 64 channels of SoundGrid
Up to 64 channels of Dante
Supported sample rates: 44.1–96 kHz
Clock source: SoundGrid/Dante
1U rack-mountable
Redundant power supply (optional, separate purchase)
Exclusively available through a Waves Audio Distributor (www.waves.com)

Other manuals for Hear Technologies Hear back pro

Related product manuals