Heathkit HD-1250 - Operation and Applications; General Operation; Injection and Absorption Modes

Page
40
CARRYING
CASE
Refer
to Pictorial 9-1
for
the following
steps.
( )
Position
the carrying
case on
your work area
as shown in
the Pictorial.
( )
Remove
the backing
paper from the
5-3/4"
x
7-3/8"
foam pad and press
the
pad into the recess inside
the
top
cover of
the carrying case.
( )
Close
the carrying
case cover. Then, carefully
peel the paper
backing from
the "Heathkit" label
and press the
label in place in the recess
under the
carrying handle.
EXTENSION
PROBE
NOTE: There
may
be applications for
your Dip
Meter where it
will be
impractical
to get the
whole coil
and instrument into
cramped
spaces. The
following
steps permit
you to construct
an extension
probe that will effectively
let
you reach into
confined
areas
with your Meter.
The materials for
the
extension
probe are
not provided
with your kit.
PICTORIAL 9-1