ND 1200 QUADRA-CHEK 15
1.1 ND 1200 Overview
Number keypad with:
Number keys for data entry
Decimal point and +/- keys for data entry and LCD screen contrast
adjustment
User-defined hot keys that program panel and optional remote keys
to initiate commonly used functions.
User-defined programs made of the key-press sequences used to:
Perform measurements
Apply tolerances
Report results
Reports of measurement results printed to USB printer, sent to PC
over RS-232 connection or stored on USB drive
User-defined programs and system settings stored on USB drive
Speaker jack outputs for quiet or noisy environments
Optional optical edge detection probes and enters feature data
points at light to dark transitions on the comparator screen
Optional remote foot switch and keypad facilitate measurement
when the user is not close to the front panel
To Next Page
Loading...
