ND 1200 QUADRA-CHEK 91
2.3 Software setup
Loading settings files and startup screens
The Supervisor screen contains tools for loading ND 1200
configuration settings files and OEM startup screens. Settings files
can be loaded from a USB drive when the configuration parameters
from a previous setup session were saved. This eliminates the need
to configure the ND 1200 manually using the setup screens. Settings
files also contain any ND 1200 programs and error correction data that
existed when the settings file was saved. Startup screen images can
also be loaded from the USB drive that display OEM graphics when
the ND 1200 power is turned on.
To load settings files and startup screens:
U Insert a USB drive containing the settings.bin file and startup.txt file
(optional) into the USB port.
U Press MENU/SETUP to display the setup menu and then highlight
the Supervisor menu item.
U Highlight the Password data field and enter the password.
U To load the configuration parameters (settings.bin file): press the
LOAD soft key, then follow the instructions displayed on the screen.
U To load the new OEM startup screen (startup.txt file): press the
STARTUP soft key, then follow the instructions displayed on the
screen.
U Press the FINISH key to save parameters and return to the setup
menu.
Enter the Supervisor password
To Next Page
Loading...
