ND 1200 QUADRA-CHEK 3
ND 1200 Introduction
ND 1200 panel keys
Panel keys are used to initiate feature measurements, apply
tolerances, send reports of measurement results and configure
operational parameters.
1 LCD screen
2 Soft keys
3 Measurement function keys
4 Axis keys
5 Mode selection keys
6 Command keys
7 Menu key
8 Arrow cursor keys
9 Fast track keys
10 Numeric keypad
11 Send key
12 LCD On/Off key
Panel function key Panel key
Soft keys: Functions change in support of the activities displayed
on the LCD.
Measure keys: Select a feature measurement type. Feature
measurement types include points, lines, circles distances,
angles, skew alignments and Measure Magic.
Axis keys: Select axes for zeroing or presetting datums prior to
measurements.
Mode keys: Select unit of measure, datum, cartesian or polar
coordinate system and help.
Command keys: Control measurement and data entry
processes.
To Next Page
Loading...
