HEIDENHAIN TNC 370 D - Page 56

July 02 Machine Parameters TNC 370 D 4–53
Machine
parameter
Function and input Change via Reaction
MP60 PLC-auxiliary axis
Input: %xxxx
Bit 0 to 3 0 = not active
Axis X to 4 1 = active
Reset
MP110.0-3
Assignment of the position measuring
system inputs for the axes
Input: 0 to 6
0 = no position measuring system
1 = position measuring system input X1
2 = position measuring system input X2
3 = position measuring system input X3
4 = position measuring system input X4
6 = position measuring system input X6
Reset
MP111 Assignment of the position measuring
system input for the spindle
Input: 0 to 6
0 = no position measuring system
1 = position measuring system input X1
2 = position measuring system input X2
3 = position measuring system input X3
4 = position measuring system input X4
6 = position measuring system input X6
Reset
MP112.0-3 Assignment of the rpm measuring system
inputs for the axes
Input: 15 to 19
0 = no rpm measuring system input (analog
axis)
15 = rpm measuring system input X15
16 = rpm measuring system input X16
17 = rpm measuring system input X17
18 = rpm measuring system input X18
19 = rpm measuring system input X19
Reset
MP113 Assignment of the rpm measuring system
inputs for the spindle
Input: 15 to 19
0 = no rpm measuring system input (analog
axis)
15 = rpm measuring system input X15
16 = rpm measuring system input X16
17 = rpm measuring system input X17
18 = rpm measuring system input X18
19 = rpm measuring system input X19
Reset