HEIDENHAIN TNC 370 D - Page 66

July 02 Machine Parameters TNC 370 D 4–63
Machine
parameter
Function and input Change via Reaction
MP3440
MP3440.0-7
k
v factor for spindle orientation
Input: 0.1 to 10 [Fehler ]
Gear range 1 to 8
!
PLC
RUN
MP3450
MP3450.0-7
Number of revolutions of the spindle
position encoder
Input: 0 to 255
0 = no transmission
Gear range 1 to 8
PLC
RUN
MP3451
MP3451.0-7
Number of revolutions of the spindle
Input: 0 to 255
0 = no transmission
Gear range 1 to 8
PLC
RUN
MP3510
MP3510.0-7
Rated speed for gear ranges
Input: 0 to 99 999.999 [rpm]
Gear range 1 to 8
PLC
MP3515
MP3515.7
Maximum spindle speed
Input: 0 to 99 999.999 [rpm]
Gear range 1 to 8
PLC
MP3520.0 Spindle speed activated by marker M4011
Input: 0 to 99 999.999 [rpm]
PLC
RUN
MP3520.1 Spindle speed for oriented spindle stop
Input: 0 to 99 999.999 [rpm]
PLC
RUN