July 02 List of Modules TNC 370 D 6–89
Module Function
9093 Read from .T/.D/.TCH tables
9094 Write in .T/.D/.TCH tables
9100 Assign RS-232-C interface
9101 Release RS-232-C interface
9102 Read interface status
9103 Send string via RS-232-C
9104 Receive string from RS-232-C
9105 Transmit binary data via RS-232-C
9106 Receive binary data from RS-232-C
9107 Read binary data from reception buffer
9120 Start a PLC axis
9121 Stop a PLC axis
9122 Interrogate status of PLC axis
9123 Traverse the reference point of a PLC axis
9124 Set override value for PLC axis
9145 Actual and nominal value transfer in every operating mode
9155 Open axis position control loop
9156 Close axis position control loop
9171 Oriented spindle stop
9180 Key simulation
9181 Disable individual NC keys
9182 Re-enable NC keys
9183 Disable groups of NC keys
9184 Re-enable groups of NC keys
9186 Execute soft-key function
9187 Interrogate the status of the soft-key function
9200 Create/delete PLC soft-key row
9201 Create/delete PLC soft key
9220 Cross over reference points
9221 Start PLC positioning
9222 Interrogate status of PLC positioning
To Previous Page
Loading...
