8 – 46 HEIDENHAIN Technical Manual TNC 426, TNC 430
PATH Directory: Enter the complete directory (note the
proper capitalization) of the NFS server that you
wish to mount.
UID User ID: Enter the user identification for
accessing the files in the network. The entry
must be a decimal number.
GID Group ID: Enter the group identification for
accessing the files in the network. The entry
must be a decimal number.
DCM Directory Create Mode: Here you assign access
rights to directories on the NFS server. The entry
is binary, with 3 places each for owner, group and
the other users. Sequence:
%<Owner><Group><Rest>;<Read><Write>
<Search>
FCM File Create Mode: Here you assign access rights
to files on the NFS server. The entry is binary,
with 3 places each for owner, group and the
other users. Sequence:
%<Owner><Group><Rest>;<Read><Write>
<Execute>
AM Auto mount (yes = 1/ no = 0): Here you define
whether during power-on the TNC automatically
mounts the network. If you do not mount
automatically, you can mount at any time
afterward by using the NET soft key in the
program manager.
Only NC software 280 470-xx:
DOMAIN Domain name: This is the name used by the TNC
in the network. If you use a domain-name server,
you must enter the Fully Qualified Domain Name
here. If you leave this entry blank, the TNC will
use the so-called null authentication. The entries
under UID, GID, DCM and FMC will be ignored.
Soft key Option Meaning
To Next Page
Loading...
