December 2001 Touch Probe 6 – 355
Variable names:
Time management
Name Format type Description
HOUR Int No. of hours from real-time clock
MIN Int No. of minutes from real-time clock
SEC Int No. of seconds from real-time clock
DAY Int Day from real-time clock
MONTH Int Month as no. from real-time clock
STR_MONTH String Month as string abbr. from real-time clock
YEAR2 Int Two-digit year no. from real-time clock
YEAR4 Int Four-digit year no. from real-time clock
Results or input from the manual measuring cycles in the control data
Name Format type Description
TCH.AXIS String Selected probe axis
TCH.PLANEROT Double Basic rotation angle
TS.RAD Double Calibrated probe radius of triggering touch probe
TS.LEN Double Calibrated probe length of triggering touch probe
TS.OFF1 Double
Calibrated center offset in reference axis of triggering touch probe
TS.OFF2 Double Calibrated center offset in minor axis of triggering touch probe
TS.RINGRAD Double Calibration ring radius for triggering touch probe
TM.RAD Double Probe radius 1 of measuring touch probe
TM.RAD2 Double Probe radius 2 of measuring touch probe
TM.LEN Double Calibrated probe length of measuring touch probe
TM.OFF1 Double Calibrated center offset in ref. axis of meas. touch probe
TM.OFF2 Double Calibrated center offset in minor axis of meas. touch probe
TM.CORSTAT[0] Double Calibrated stylus bending in X axis of meas. touch probe
TM.CORSTAT[1] Double Calibrated stylus bending in Y axis of meas. touch probe
TM.CORSTAT[2] Double Calibrated stylus bending in Z axis of meas. touch probe
TM.CORDYN[0] Double Force ratio in X/Z axis of measuring touch probe
TM.CORDYN[1] Double Force ratio in Y/Z axis of measuring touch probe
Results or input from the manual measuring cycles
Name Format type Description
BZ Double Datum
BEZA String String datum axis
Datum at corner, circle, 4 holes, 3 holes on a circle
Name Format type Description
BZ_HA Double Datum in reference axis
BZ_NA Double Datum in minor axis
LKALBEZ Double Datum entered with calibrated probe length
HA String Main axis character
To Next Page
Loading...
