December 2001 Electronic Handwheel 6 – 383
6.16.1 HR 130 Panel-Mounted Handwheel
7
77
7 Enter MP7640 = 2 (HR 130)
When the axis keys are pressed, the associated cursor and the handwheel
symbol are displayed simultaneously.
6.16.2 HR 410 Portable Handwheel
7
77
7 Enter MP7640 = 6 (HR 410)
7
77
7 In MP7645, specify whether the keys on the handwheel are to be evaluated
by the NC or PLC.
Evaluation of the keys by the NC: MP7645.0 = 0
With the exception of the function keys A, B and C, all keys are evaluated by
the NC.
7
77
7 With MP7670.x, select the interpolation factors for low, medium and high
speed.
7
77
7 With MP7671.x, define the values for low, medium and high speed. The
speed is entered as a percentage of the manual feed rate (MP1020.x).
To Next Page
Loading...
