December 2001 Tool Changer 6 – 401
7
77
7 In MP7266.x, specify the fields of the tool table that are to be displayed and
the sequence in which they appear.
7
77
7 In MP7267.x, specify the fields of the pocket table that are to be displayed
and the sequence in which they appear.
Note
The complete width of the tool table cannot exceed 250 characters. Wider
tables cannot be transmitted through the data interface.
For the width of the individual columns, see MP7266.x.
Left side of the tool table
Right side of the tool table
Example pocket table
To Next Page
Loading...
