Operation
31
Setting the rotation start time
You can set a start time:
▪ For one of your favorites.
▪ For a setting which you have directly entered in the main menu. taking consideration
of the pre-programmed time.
The start time is interpreted as the actual time. To ensure rotation
starts on time it is important that the clock is set correctly.
➜ Activate the prole for one of your
favorites or enter the settings in the
main menu.
➜ Select the menu item “Start time” in
the submenu.
➜ Push the control knob to edit the time.
➜ Set the time for the prole to start.
➜ Push the control knob to conrm the
start time.
➜ Press “Activate”
to activate the
start time.
7:30
Real Time
The start time remains active until it is deactivated again by the
operator.
✓ The clock icon starts ashing in the upper left-hand corner of the display.
✓ 30 seconds before to automatic start, the whole display starts ashing.
➜ Deactivate the start time by pressing “Deactivate”
.
Warning:
Automatic start!
Risk of injury! Risk of entanglement!
Rotating items can lead to severe injuries by drawing in long hair,
loose clothing, jewelry or the like.
➜ Keep long hair, jewelery or loose clothing away from rotating parts.
➜ When a start time is activated, place the warning sign (page
91-92) close to the stirrer. Every individual must be aware of the
potential risk of injuries.
➜ As soon as the display starts ashing, keep a safe distance from
the device to avoid contact with any rotating parts.
➜ Deactivate “Start time” as soon as a prole is nished if it does not
need to be repeated.
✓ Rotation starts at the pre-programmed time.
To Next Page
Loading...
Need help?
General
