Heidolph Hei-TORQUE Value Series User Manual

Start-Up
19
Safety settings
Use the “Safety settings” menu to individually adjust all settings required by the nature
of your sample to ensure personal safety.
Setting the acceleration
Switching rotation on may result in
splashing at high acceleration.
The default setting is medium
acceleration.
➜ Select the “Acceleration” menu item.
Acceleration
Speed limit
Torque limit
✓ The current setting is marked with an
asterisk.
➜ Select the required setting.
➜ Push the control knob to conrm.
Fast
Medium *
Slow
✓ The selected setting is displayed briey
for conrmation.
➜ Press “Back”
to exit the
“Acceleration” menu.
Acceleration: medium
Setting a speed limit
Some samples may only be exposed to low rotation speed. In this menu you can restrict
the speed to avoid accidental changes.
The default setting is the maximum
possible speed.
➜ Select the “Speed limit” menu item.
➜ Set the required maximum speed in
rpm.
➜ Push the control knob to conrm.
Speed limit [rpm]
2000
OK
✓ A conrmation is displayed briey.
➜ Press “Back”
to exit the menu.
✓ The speed cannot be set to higher than
this speed limit, regardless of the gear
stage selected.
Limit saved!

Heidolph Hei-TORQUE Value Series Specifications

General

Brand	Heidolph
Model	Hei-TORQUE Value Series
Category	Monitor
Language	English