Heidolph Hei-TORQUE Value Series User Manual

Start-Up
21
Editing the prole
You can edit up to seven proles and save them as favorites.
The timer of each prole step always counts down to zero. This means
that each subsequent prole step must always be at least 1 minute
higher than the previous step. – Exception: Ending the prole cycle.
Example:
▪ 1
st
step: Time = 00:02
Rotation = 200
Ramp = l
Speed increases to 200 rpm within 2 minutes.
▪ 2
nd
step: Time = 00:03
Rotation = 400
Ramp = l
Speed increases to 400 rpm between the 2
nd
and the
3
rd
minute.
▪ 3
rd
step: Time = 01:00
Rotation = 400
Ramp = l
Speed remains at 400 rpm between the 3
rd
and the
60
th
minute.
➜ Open the submenu.
➜ Select the “Edit prole” menu item.
hh : mm rpm l
➜ Push the control knob and select the
rotation time by turning the control
knob.
00 : 00 rpm l
➜ Push the control knob to conrm and
select the speed by turning the control
knob.
00 : 02 0 l
➜ Push the control knob to conrm
selection.
✓ The prole symbol is now displayed in
orange.
00 : 02 200 l
Ramp icon
▪ l : The speed immediately ramps up to the pre-programmed rpm settings for the
pre-programmed time.
▪ / : The speed increases (or decreases) gradually within the pre-programmed time
until it reaches the pre-programmed rpm setting.
➜ Choose your desired ramp by
turning the control knob clockwise or
counterclockwise.
➜ Push the control knob to conrm
selection.
00 : 02 200 l
00 : 02 200 /
✓ The positioning indicator jumps to the
next row.
➜ Enter the next ramp.
00 : 02 200 /
hh : mm rpm l

Heidolph Hei-TORQUE Value Series Specifications

General

Brand	Heidolph
Model	Hei-TORQUE Value Series
Category	Monitor
Language	English