Operation
38
Connecting interfaces
The USB interface cable supplied is 1 m long. We advise against using
longer cables.
A longer cable might result in data transmission errors.
✓ The device is switched o.
➜ Insert the plug on the interface cable into the interface on the back of the stirrer.
➜ Insert the other end into the USB port on your PC.
Warning:
Automatic start! Risk of injury! Risk of entanglement!
Rotating items can lead to severe injuries by drawing in long hair,
loose clothing, jewelry or the like.
➜ Keep long hair, jewelery or loose clothing away from rotating parts.
➜ Before you activate remote control, place the warning sign
(page 101-102) close to the stirrer. Every user must be aware of
the potential risk of injury.
➜ Keep a safe distance from the device to avoid contact with any
rotating parts.
Linking interfaces
✓ The PC is switched on.
➜ Switch the overhead stirrer ON.
➜ Start rotation on the PC.
✓ The data link between the PC and stirrer is completed.
✓ The stirrer is switched to remote control mode.
✓ All commands are executed via the PC.
✓ Only the slider on the stirrer is still active to allow you to end the stirring process.
✓ You can always switch it OFF using the ON/OFF switch on the stirrer.
To Next Page
Loading...
Need help?
General
